Hitachi 61SWX10B 61" Rear Projection Television "tv error codes red" Questions

...blinks 3 turn tv on tv nothing happend red light blinks 3 times both fans come on O would need the model number to assist you, as the s blinks is an error code, but error codes are model

ERROR CODE 34 on Mitsubishi TV I have a mitsubishi 57inch DLP, the bulb was replaced after only 2000 hours. Red light went on again, they replaced the bulb within 2 weeks a 2nd time. Red light on ...

...Error Code Operational Check Note: The TV must be in ?Shut Down? and not manually switched Off, to perform the Error Code Operational Check. When the TV is switched Off, the code automatically resets ...

Error Code Operational Check Note: The TV must be in "Shut Down" and not have been switched Off, to perform the Error Code Operational Check. When the TV is switched Off, the code automatically resets

...error. Listen on the back right hand side of the TV (facing the TV) when you turn it on, to see if you can hear the fan running. You can grab a flashlight and see it and can also feel it blowing air. ...

...Error Code 12 About a week ago my WD 62525 tv's screen wouldn't turn on and the replace bulb light was red. I replaced the bulb and now when I power my tv on I hear a static sound but the screen ...

TV error code 44? Have 2006 Mitsubishi DLP Projection TV Status light comes on shortly after turn on and stays solid red Using error code test I get 4 or 44 from the blinks. Can not find any detail of

Mitsubishi error code DLP TV I have a 65" Mitsubishi TV (WD-65C10) blinking error code 16 or 61. One yellow then Six red. Can't find documentation on the code. CONTACT MITSUBISHI TECH SUPPORT

...TV with a solid red status light on the front. Used the Device and the menu buttons to get the 41 error code. Error codes seem to indicate a "short" of course that's not helpful at all. Where do I ...

...tv, the power button blinks red once and then blinks red four times. It does not turn on. What error code is that or what is the problem. I will need to know the model number of your set in order to ...