Hitachi 61SWX10B 61" Rear Projection Television "ring convergence" Questions

...RING RIGHT to enter the CONVERGENCE menu. Press the CURSOR RING RIGHT to enter CONVERGE RED mode. Press the CURSOR RING LEFT, RIGHT, UP, or DOWN to adjust the cross image until the color outline ...

...is impossible. Any suggestion is highly appreciated. try aligning them using the yoke control rings. sometimes the alignment is so far out that you have to adjust the magnet rings

...convergence rings on them, fined tuned so be careful not to rough handle them. You'll have to find the one that is bad, possibly by lightly trying to move the rings.This is a very long and drawn out ...

I replaced the lens fluids on a Philips Magnavox 55PW936317F. I might have bumped the magnetic rings on the end of the CRT tubes out of alignment. Now the blue is way off and I can't seem to fix ...

...manually adjust the color guns you are reaaly looking for a nightmare messing with the convergence rings to adjust the convergence you need to change the two ics and probly some ...

...amp ic's./if you want to cheat/align the other two colors and manualy move the green yoke rings on the green picture tube neck so the green cross aligns with the red and blue.,they shuold ...

...way. You have a convergence board that is bad. At its best you may have to resolder the ICs, as rings around the pin will indicate a poor ground. On the other hand you will need to replace two ...

...convergence board is in need of new convergence ICs...Or if you are lucky,maybe just checking for rings around the ICs for bad grounds.Please solder these if this is the case. And Always check the ...

...working look great convergance is perfect. any suggestions what would take out the chips? yokes ring good. are the resisters ok? i might suggest sending the board into ...

...the tv. Find the magnetic ring at the neck region of the picture tube. Tilt that magnetic ring viewing the picture of tv in the mirror. See the info on convergence of a Hitachi 50FX19K TV. ...