Problem with resisitor 58 Anyone know the rating of rk58 RK58 = 3.9 ohm 1 w ......That info is included in the kit you should have used to rebuild your TV....part # X480293......... T.
Hitachi 43uwx10b From yankees1 The resistor that is blown is rk58 which I need the color identification for replacement. The board that the resistors are on is DP1X Convergence PWB. The ic chips ...
43FDX20B RK58 RK50 RK54 RK42 Values STK392-120's The following resistors need to be replaced but I'm uncertain what the values are supposed to be. RK58, RK50, RK54 and RK42, I'm ...
...upgrade from the STK392-110) but I am unsure about the ohm values for resistors RK42, Rk46, RK62, RK58, RK54 and RK50. Does anyone have schematics for my TV or know the values? Thanks RK42 = 2.2 , ...
i need the resistor values for RK42, RK46, RK50, RK54, RK58, RK62 when using stk392-120 chips in Hitachi 53UWX10BA. If it is 53uwx10B: RK42 2.2 OHM 1 WATT RK46 1.5 OHM 1 WATT RK50 2.2 OHM 1 WATT RK54 ...
...to buy the stk392-150 ic's to replace the old ones and i have two bad resisters it is the rk58 it is very much bad, it is even burnt a little, then the rk62 is at 4.7, these are tested on ...
no power what could it be Most likely IK04 & IK05 are bad. Also check small ohm resistors RK42 thru RK58
ik04,ik05(stk392-110,if bad,replaced with stk392-150).resistors:rk46,rk54-1,5ohm.,rk42,rk50-2,2ohm.,rk58-3,3ohm.,rk62-1,8ohm.also check line fuses.
...to know the watts 1 watt,Service Manual I have says RK42 3.3ohms RK46 1.8ohms RK50 2.7 RK54 1.5 RK58 3.9 RK62 ...
25 questions posted
Usually answered in minutes!
727 Questions
631 Questions
405 Questions
415 Questions
357 Questions