Hitachi 60SDX88B 60" Rear Projection Television "tv crack night" Questions

...TV JUST WENT RED LAST NIGHT AND THEN WENT OFF AND IT WILL NOT COME BACK ON ANY IDEAS. IT TRIEDS TO START UP WITH A BLINK AND THEN OFF AGAIN This model TV has a gasket on the red picture tube that ...

...TV's then you should call an expert. If you are comfortable, then read on. It has been my experience with older rear projectors that the solder joints on the main board become cracked over time. If ...

...tv just makes a clicking noise like a fan slowing down or something. Any help would be appreciated. had a 51" GE rear projection donated to myself. While off and power button pressed there was a ...

...TV's then you should call an expert. If you are comfortable, then read on. It has been my experience with older rear projectors that the solder joints on the main board become cracked over time. If ...

TV worked fine last night. This morning worked for about an hour. Then it turned itself off. I thought the kids did it, and left it alone. Half an hour later, I heard the TV turn on with no one in the

night with a loud pop. I followed online instructions to remove it and orderd a new lamp. Then, I noticed that a small 1"x1" piece of glass between the lamp and color wheel is cracked. Can I

...TV's then you should call an expert. If you are comfortable, then read on. It has been my experience with older rear projectors that the solder joints on the main board become cracked over time. If ...

tv. It seems to mostly affect the picture on the edges of the screen. If you dont mind explaining Dan I would take a crack at soldering it. Look for the convergence menu in the manual and try to align

night I was watching, and the picture went out, I truned off the TV, then restarted it...the picture came back. Today I tryed to turn it on and no picture, just audio. Help s the audio coming from the

...TV turns on then turns off. It has been my experience with older rear projectors that the solder joints on the main board become cracked over time. If you have a set that shuts down after warming up, ...