Hitachi 65SWX20B 65" Rear Projection Television "side number 1 plug" Questions

...number of possibilities: 1) Since this is a CRT based set, the most common failure os of the horizontal output transistor. This goes shorted which causes too much current draw on the power supply and ...

...number on the power supply itself. it may save you time and errors. These boards are often simply plugged into other assemblies with dissimilar plugs but if you decide to DIY, take some snapshots of ...

NUMBER printed on each in white. If you have this version the board is held in by 3 screws---you snap up a row of black plugs on the left side and several other plugs on that board have to be removed-

number LCA90059 on it with the words CRT SKT PB ***'Y on it) 2 wires coming from it (one 6 wire group with white plug ins on each end, and one 4 wire group with white plug ins on each end) and a large

...number one... and nothing turn off Hi, i suggest to you just un plug your tv... and open the little pannel in the right side of you tv....(Not the side of the lamps, otherside!!) and clean and remove ...

...side and will have the STK-392-120 printed on them in white letters. The resistors are to the left and behind the chips---the blue resistors will be near the back edge of the board--all will have ...

...side. Words on screeen are seen above in green and below in red. I unplugged TV for approx. 1hr and plugged back in problem still exists. Cleaned and ck'd all projectors for security. TV mfg date is ...

...side a bit and several times it went away. I couldn't solve this problem. Now I have another situation and don't know if they're both related. Here's what happens: 1 - I plug the tv to the outlet. ...

...side of the power cord.. is this the power supply? is it hard to change and do you have a part # price and supplier? Flyback transfromer is bad,part number 259296,part is around 60.00,you might find ...

...1 minute. Then it should work. Any questions or clarifications..let me know. As for capacitors, they fail as a short or open..just keep in mind that other components will modify the reading. Check ...