Hitachi 51SWX20B 51" Rear Projection Television "rk62" Questions

need resistor value for RK62 on DP2X board for 57SWX20B Resistor is burnt and cant see colors. Anyone know the resistor value for RK62 on DP2X board near the green convergence connector. RK62 is a ...

I have Hitachi 57F500A, the resistor RK62 is out the replacement with the kit are different what I need to know it the right answerer for the RK62 what is the ohm 2.2 or 1.8 I see two different people

65xwx20b need values for rk42,rk46,rk50,rk54,rk58,rk62 Ihave dp2x board rk50 burnt can't see colors Is this a Hitachi set? If so then check the model number and be sure it's right. i need value for ...

...earlier. I followed your previous advice and replaced the STK392-110 and STK392-150 chips and the RK62 resistor which was bad, however the horizontal lines (Blue) remain a problem and cannot be ...

Hitichi 51f500 Chasis DP23/35 RK62 Resistor I Have a blown rk62 resistor in my Hitichi 51F500 Chassis DP23/35 I Cant tell what that resistor value is. Radio Shack thought it was a 1/2watt 2ohm most ...

i need the resistor values for RK42, RK46, RK50, RK54, RK58, RK62 when using stk392-120 chips in Hitachi 53UWX10BA. If it is 53uwx10B: RK42 2.2 OHM 1 WATT RK46 1.5 OHM 1 WATT RK50 2.2 OHM 1 WATT RK54 ...

...to blow. I might have the wrong size or something, but according to my notes RK 42 = 3.3ohms and RK62 = 2.2ohms (both 1W). I had the wrong size on the RK62 at first and put the right one in after ...

model # 57swx20b the picture doesnt work check rk62 (2.2ohms)

...bad,replaced with stk392-150).resistors:rk46,rk54-1,5ohm.,rk42,rk50-2,2ohm.,rk58-3,3ohm.,rk62-1,8ohm.also check line

...i have two bad resisters it is the rk58 it is very much bad, it is even burnt a little, then the rk62 is at 4.7, these are tested on the board. If i replace these two resisters what ohm do i get