...let set for several minutes the plug in and turn on. Could be in a serv mode. i have a sanyo CE32LD33-B tv and it wont come out of standby it either stays blue or flashes but wont turn on ANY
...tv settings then goto the convergence or magic focus section. Try to adjust the convergence. You should be able to move them up, down, left, and right. If you can't move them in all directions your ...
...Sanyo STK chips, convergence resistors, pico fuses, etc. Problem #2 CRT Fluid is Cloudy Projection TV tubes have a liquid coolant that is used to keep them from overheating. After many years the ...
Question about Panasonic Televison & Video
...Sanyo STK chips, convergence resistors, pico fuses, etc. Problem #2 CRT Fluid is Cloudy Projection TV tubes have a liquid coolant that is used to keep them from overheating. After many years the ...
Question about Philips Televison & Video
TV has as flash focus or magic focus button only try pressing the button. If it fails to fix the convergence your need to fix it. See below for a solution CONVERGENCE SOLUTION You will need to replace
...Sanyo STK chips, convergence resistors, pico fuses, etc. i had same problem, i opened up the back of tv. then i turned on the cable guide. i saw three lines blue, red, and green. under the lamp there ...
...Sanyo. A lot of the less expensive IC?s are not original and the aftermarket types made in China. I have heard also that some parts distributors buy factory reject IC?s and sell them as good original ...
TV has as flash focus or magic focus button only try pressing the button. If it fails to fix the convergence your need to fix it. See below for a solution CONVERGENCE SOLUTION You will need to replace
...TV shut off by itself. I waited 3 minutes and pushed the power button, but all it will do is cause the power button to start flashing,no pic,no sound, just the power buttonred light flashing. Can you ...
307 questions posted
Usually answered in minutes!
727 Questions
631 Questions
405 Questions
415 Questions
357 Questions