Question about Hitachi Televison & Video
resistor value for RK62 on DP2X board for 57SWX20B Resistor is burnt and cant see colors. Anyone know the resistor value for RK62 on DP2X board near the green convergence connector. RK62 is a 2.2ohm 1
...resistor RK62 is out the replacement with the kit are different what I need to know it the right answerer for the RK62 what is the ohm 2.2 or 1.8 I see two different people have stated different ohm. ...
RK62 resistor which was bad, however the horizontal lines (Blue) remain a problem and cannot be aligned. The RK62 rsistor was hard to identify so I used a 1/2 Watt 2.7 OHM resistor as the original one
...RK62 Resistor I Have a blown rk62 resistor in my Hitichi 51F500 Chassis DP23/35 I Cant tell what that resistor value is. Radio Shack thought it was a 1/2watt 2ohm most post seem to say it a 1watt 2.2 ...
...colors Is this a Hitachi set? If so then check the model number and be sure it's right. i need value for RK62, resistor burnt and cant see colors. on DP2X board 57SWX20B near the green STK
...IK04 is a STK392-110 and IK05 is the stk392-150 the two resistors RK58 is a 4.7 ohm 1watt metal film resistor and RK62 is a 2.7 ohm 1watt metal film resistor. Only use metal film 1watt 5% ...
...resistor to check that. Why is the RK62 blowing when I start up the TV? Any ideas? Oh and when I went to play with the convergence, its even worse. NOTHING will move now, as opposed to after I fixed ...
...and ready to order parts but need to know if replacing ic 110 with 150 is feasible. If so do resistors need upgrade Yep its ok. No change in resistors is necessary. Dan It requires the ...
What is the value on resistor RK 62 and RK 63 for the 57F500A Hi,See the value of the resistors below.RK62 - 5.6 ohm (1 watt)RK63 - 150 ohm (2 watts)Good luck!Jdvillanueva
307 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: