Shop Vac 925-13 Canister Wet/Dry Vacuum "craftsman filters" Questions

Is there an reset button on the craftsman 16 gal it was running and stopped. i had some crud in the air filter and removed that but it still wont run thanks Dave do you put the foam filter over the ...

...thru exhaust...according to your website i need to take out the filter...how do i do that?...i have craftsman model wetvac that doubles as a bllower..thanks Pull the blower out from the lid. flip it ...

do i need to remove filter on my craftsman to vac up wet Absolutely yes. If not, the filter will be saturated with water and ruined.

craftsman wet/dry vac i'm not sure how the filter is supposed to sit back in the vac. I cleaned out the vac, when i went to put the filter back on, it wont' stay on the tube? It is supposed to have a ...

...craftsman vac is blowing dust out the difuser filter. Have cleaned the filters out. Any other suggestions? the neoprene sleeve used as the filter may have come off the cage. there's a plastic ring ...

...craftsman filters, but you can use other brands if they are not available or you want to save some ( $ ) ? As far as a manual for this vac, more then likely you will have to go to the maker and ...

where do i place the foam sleeve for 5 gal craftsman wet vac I have a 5 gal craftsman wet vac, I'm not sure where the foam sleeve goes. The foam just is put over the round center beneath the top of ...

craftsman vaccuum filter which filter does a craftsman 4.5hp 10 gallon wet/dry vaccuum use, model 4045? I think you are missing part of your model number.  If you go to www.searspartsdirect.com ...

old shop vac i have a old craftsman shop vac model 500A 5gal 1.25hp should there be a filter on it? and where can i get parts? thanks diane Hi, Yes there should be a filter fitted onto the top section

Craftsman's filters and tank. Be sure to empty your vacuum often and replace/clean the filter after every few uses. This will all help ensure powerful suction. You can purchase replacement filters for