Hitachi 43UWX10B 43" Rear Projection Television "magic focus error" Questions

magic focus error Hitachi 52 On my Hitachi 52'' TV the green is separated from the other colors and when we run magic focus it stops on green and then puts up a code 4. When we try to manually adjust ...

...Magic Focus' (focus is now way off), then shuts down. It will immediatly turn back on the picture, but no audio (unit thinks it is off). Magic Focus is set to manual only, yet it comes on ...

magic Focus error green 5. I have an issue when I run magic focus. It runs through the sequence and ends with a green 5, and never gets a good alignment. The red gun appears to be not aligning to the ...

magic focus 4 error What does the magic focus 4 error mean? on a Hitachi rear projection tv Error 4 is listed as an overflow in the convergence section. To fix: 1. Check the placement of the sensor 2.

...magic focus, the #4 appears on the screen during the green portion of the magic focus? rojamon, That #4 error is listed as "overflow," and I got a"ROM overflow" errorwhen I tried to save my adjusted ...

...then it turns itself off after about 10 seconds. run magic focus, If you get a error 4 during the magic focus, that is often an issue with the convergence i dont have the remote for this tv

...magic focus? Mean ur tv convergence board it is dead,any codes error at all,mean the tv convergence board have components it is dead and the board it just dosen't conververt it three CRTS tv ...

magic focus error Hitachi 51F500A On my Hitachi 51'' TV the green is separated from the other colors and when we run magic focus it stops on green and then puts up a code 4. When we try to manually ...

...magic focus no longer works. Any suggestions as to what would cause this? Thanks. Double check your work for errors such as solder bridges or incorrect resistor placement. Look carefully anywhere ...

...magic focus mode on when the power button is pressed on the remote and even manually. The TV automatically turns to magic focus mode and will not turn off when the power button is pressed on the ...