Hitachi 57F500 57" Rear Projection HDTV-Ready Television "tip vision television" Questions

...picture this sounds like the common fl231 i sugguest you read the fl231 fuse problem under the tips and tricks section of this website. this is a simple very inexpensive ...

Tv? I would try to clean the projection lenses before I replace the tubes. Try usiong alcohol and q-tips. Good luck

...vision. Tried auto focus does not solve the problem. Your convergence circuitry needs repaired. I have a tip at http://www.fixya.com/support/r4220499-change_projection_tv_convergence_ics which ...

...vision and color is red and green You have a convergence problem. I have a tip at http://www.fixya.com/support/r4220499-change_projection_tv_convergence_ics which explains the problem, how to repair ...

...vision orange shadow looks like tow people instead of one You have a convergence problem. I have a tip at http://www.fixya.com/support/r4220499-change_projection_tv_convergence_ics which explains the ...

vision). when i setup convergence setting (green is moving up/down/left/righ but red is moving up/down only, and blue is not moving in any direction). Is there any tip how can i set blue and red (left

...vision thing happening on the left side. Is this fixable at home or are we going to have to take it in to get repaired? mel petersen, You have a convergence problem. Not that difficult to repair if ...

...vision disability. Please help.... czyrdhd, If I had to guess, and that's what I am about to do, I would say that you have bad electrolytic capacitors in the power supply board. I can help you find ...

...vision/color problem? delacruz7355, What you are describing sounds like a convergence problem. This is usually caused by the convergence ICs failing. They run hot and do alot of work so when the heat ...

...vision dustinis, While it may be true that your son hit the button on the quick focus, I doubt that he caused the problem. Why was he hitting it in the first place? Probably because the unit was not ...