Hitachi 57F500 57" Rear Projection HDTV-Ready Television "print looks 3d" Questions

print. Please do us a favor and rate this solution after reading. Projection TV sets have two very common problems. One is convergence ( 3D/Warped video) the other is CRT fluid ( Dull Video). Here are

...looks like a 3D picture it started down in the lower right hand corner and finally progressed to the whole picture. You cannot do any gun alignment. It has done this before and we had to replace the ...

...looks 3d in some way it is convergence problem--see attached photo. Depending on your skill parts cost will be under 25 dollars and I can tell you how to do the repair. I will also attach photo of ...

...board they are on. see attached photos. SD TECH THE CHIPS WILL LOOK LIKE THIS BUT HAVE STK-392-560 PRINTED ON THE FRONT IN

3d (r.g.b.) and sorta skewed. i can even get to the magic focus choice on the video menu but when i select it nothing happens. there is no picture except for a some flashes of color now and then. this

...looks like I need 3D glasses. I smelled something burning when this happened. Your TV set just blew out whats called the convergence IC's. These, both (2 IC's) will need to be replaced, and since you ...

...set ever made. What you need to do, and only if you have experience working on solid state printed circuit board, is to locate the STK type amp IC's, order new ones along with heat sink ...

...looks like 3D with out the glasses. Yes it certainly sounds like you have the old convergence outpuyt IC's that have gone bad in this TV set. If you have the soldering skills, and know how to work on ...

Looks like 3D - the red won't converge and is distorted Blue color fine, but red is distorted and can't make it converge. Is the tube damaged beyond repair? It looks like 3D without the glasses 55H70 ...

...side on two metal heat sinks with fins to the far left. Take a look, they will have the STK number printed on the front of them in white. Also take a look at all the tiny resistors near the front on