Hitachi 51F510 51" Rear Projection HDTV-Ready Television "aux cable tv" Questions

CABLE GOES IN YOUR STEREO AUX INPUT...ON YOUR STEREO SWITCH TO AUX AND SAME TIME ON YOUR TV....SO YOU WILL BE ABLE TO HEAR SOUND Look for the three jacks(yel.,red,wht) labbelled "output or monitor out

...AUX 2 - 6 but then transfers to Video 1 - 4. I have the cable hooked up from the wall to the TV to get 02 - 99 channels but it still doesn't work! help!!! Have you done a hard reset? (Unplug the tv ...

...to the aux input of the receiver. If you ae using a cable box r sat reciever you can connect the audio out from these devices to the aux or any input other than phono input of your Sansui

...aux input on screen showing right input u pluged rca cables from tv rca outs to sterios ins right or cable box outs to sterio ins red white rca cables right make sure tvs output sound is on in menu ...

Aux. This has happend before but we did'nt have a Comcast Digital Box. How do we change it back to cable so we can watch TV? Hello, I'm looking for a supplier of power sony kp KP-53S25 if they can get

...AUX input 'male' connector but the TV/Cable 'male' connection end is missing. Is there a way to use the AUX or any other secondary connection method to send cable signal to TV so TV can be watched ...

...it wont pick up regular tv via antenna or cable via cable line? Check to see if you aux inputs pass the audio and video. If you see picture and have sound then your problem is most likely the

...Cable Box) However, if you are using AUX for a device, press and release AUX first and then the device button for the type of device to be programmed (TV, VCR, or Cable). The selected device button ...

...CABLE). The INDICATOR LIGHT will blink once then remain lit. Note: For AUX, press DVD•AUX then the device button for the code you are retrieving. 3. Press and release CODE SEARCH. The INDICATOR LIGHT ...

...cable box Audio: There should be a set of audio outputs on your TV. Connect those to the AUX inputs of your receiver. When you turn on your receiver, set it to AUX. Set your TV volume to approx 1/3 ...