Hitachi 42V710 42" Rear Projection HDTV "tv adjusted faded picture" Questions

...TV takes a while to ''warm up'' with the picture washed out and faded. When it does come on, the colors are faded and video adjustments don't help much. Also, the picture has some wavy, shadowy, ...

...faded and can not adjust it This mite sound crazy but it is time to change the oil in your TV. Yes your TV has three seperate picture tubes on the inside of it. A red tube, blue tube, and green tube. ...

...TV picture comes back to normal then picture starts fading slowly, the whole screen goes green the picture is restored after 5 more minutes the TV stops and standby light blinks 8 times. If you start ...

cords, but when I hook up my Xbox or DVD player, it's the same faded brightness. I know it's the TV, I just don't know what it is. Someone help me!!!! It could be your main board going bad

...adjusted the color or picture how ca i fix it? Dull Video... Your set may have one or more of the following symptoms.... *Dull looking picture *White looking picture *Halos around objects *Red/Orange ...

...46" projection TV (model # PN2046) date November 1992. Picture colors are faded. what should I do Replace the CRT fluid. It grows algea in the blue and green only. 9.99 from MCM

tV FADES TO BLUE AND THEN PICTURE DISSAPPEARS- AND SOMETIMES TV SHUTS OFF AFTER GOING BLACK WITH CONCENTRIC GREEN LINES Turn your screen drive down to green and blue tube. You have a focus/screen ...

...the red, blue, and green screen controls. To adjust correctly, put the TV on an unused input(dark, blank picture) and adjust until there are no visable retrace lines or color in the image. ...

picture for about the first 30 seconds was perfect. I did the adjustments you mentioned and fixed my TV in 2 minutes. Sony and a couple service places they told me about said I needed to spend between

...TV on the picture is good then it gradually fades to blue until you cannot see the picture. The sound is fine. You can reduce the g2 for the blue tube open the front grill and open the 4 screws hold ...