...change the input source for your TV, you can use your remote to change the video source by following these steps: Turn on your TV. Press the TV/Video or Source button. The current source appears on ...
...change the source from the cable at the back of the tv to the yellow/white input source at the front? use the up/down channel until you get to the input you have connected. You did not say you had a ...
of tv, scroll down to source/input heading.Use the volume or channel select buttons to change the source Pressing the Vol - and Vol + keys on the TV at the same time act as the Enter key on the remote
sanyo tv change to av1 av2 Whenever your change from one video source to another, your tv automatically switches input modes (i.e. av1 to av2) to faciliate the source coming into your tv.
Question about Toshiba Televison & Video
...tv stuck on one channel tried new remote wont change channel went back to old remote still the same Did you try changing the source? It might be getting the channel from a source other than the
Question about Sony Televison & Video
...change back to your normal source, simply press the button until you get back to the original source. If none of the above works which it should, wait till the tv is on then power up your device ...
Question about Sony Televison & Video
...source) continues to change on its own. We can manually change it back via remote, but it cycles through again. I've already tried changing batteries. I've read elsewhere to try changing the signal ...
...change the input. To do this, select the tv mode on your dish 500 remote, and then press the source or input button until you get to where you need to be. Once thats done, make sure you return your ...
Question about RCA Televison & Video
change channels prior to this issue? If yes, then maybe you accidently changed the source mode of the TV via the remote? The source mode button chooses what signal you want to use for getting a signal
tv changing channels on its own after a few minutes when I turn the tv on, it changes the source to tv channnel1. then I try to press the source button to return to hdmi or video and it is like ...
4 questions posted
Usually answered in minutes!
727 Questions
631 Questions
405 Questions
415 Questions
357 Questions