BenQ PB6210 Multimedia Projector power led

Projector powers down as soon as LAMP lights up I have a benq then after 50 seconds it powers down completely. Then the status LEDS: the lamp led blinks green for 10 seconds and then switches more...

  BenQ PB6210 Multimedia Projector - Troubleshooting

• Rate this result:
• = Poor
• = Average
• = Good
• = Excellent

, so it doesn't start up at all. Is there any power at all on the unit , like LED's lighting up ? If there is then it would be your more...

  BenQ PB6210 Multimedia Projector - Troubleshooting

• Rate this result:
• = Poor
• = Average
• = Good
• = Excellent

lunch. I went to turn the unit off by pressing the power key twice as always. The unit would not turn off and would not power up at all and the fan/temp & lamp/cover led's began blinking. They've never come on until today. Do you guys more...

  BenQ PB6210 Multimedia Projector - Troubleshooting

• Rate this result:
• = Poor
• = Average
• = Good
• = Excellent

Ok all the fans are running... lamp is striking and then green LED blinks and then goes orange and the lamp shuts off, then after that goes into standby LED red... then does not recover unless power off then on. If it was a power ballast issue, the lamp more...

  BenQ PB6210 Multimedia Projector - Troubleshooting

• Rate this result:
• = Poor
• = Average
• = Good
• = Excellent

Replacing ballast board Hi! My VPL-CS4 powers on intermittently - every 2-3 weeks. In researching the solution I read your answer to the problem "LED won't come on and only faint hum is heard". How does more...

  BenQ PB6210 Multimedia Projector - Troubleshooting

• Rate this result:
• = Poor
• = Average
• = Good
• = Excellent