Canon CFX-L4000 Plain Paper Laser Fax "pauses fax machine" Questions

Faxing How do I Fax to a number in Germany from Canada Call the operator to find out the country code and the city code. I believe the overseas access code for Canada is 011, but you'll have to check ...

...machine to wait for something to happen you need to hit pause example: i have to dial five digit access code for my fax for LD calls it would be dialed on fax like this 1-234-567-8901 pause pause ...

...pauses are to be placed. Thank you, Stik overseas calls must use 011 then the country code 866 then teh city code then the fax number . Do not dial starting with a 1 otherwise you will be calling in ...

fax machine goes crazy. It starts letting the first page go through fine, but the 2nd, 3rd, 4th, 5th, etc pages go through w/out the fax machine pausing to acknowledge that it has a page going through

...fax .... the machine says memory 1 ... and i want to know why it says that ... the third fax comes half way printed and it stops receiving and it says memory 1 Many fax machines have little internal ...

I need to add a pause to a dialed number when sending a fax because I need to add the extension. Any Ideas on how to do this, someone suggested I use a coma but how? a comma is used on a computer ...

...fax machine to dial '9' before fax number? Hello ilay, This procedure is from the Brother FAX-4100e FAQ link: Storing Speed Dial numbers: You can store Speed Dial locations on your machine(*). Once ...

We have to dial 9 to get an outside line. When we put a pause in between the 9 and number, we can't get it to send a fax Leave out the PAUSE, phone systems nowadays are so fast you don't need it ...

fax machine must be connected using a two-conductor phone cable such as the cable pictured below at the left: If you are able to receive than the likely problem is either a prefix or a pause is needed

Pause at Connection Hi, We have a doctor's office who's fax is pausing when we try to fax them something. Is there a setting on the fax to do a pause? Is there a way to make an immediate connection? ...