ADF not working for TWAIN APIs Hi We are using Twain APIs to build scanning application. But we are facing problem for ADF scanning. When reported that problem to our Twain API vendor he told us that ...
Question about Muratec Office Equipment & Supplies
document feeder reporting paper jam when there is nojam The ADF need to be serviced the sensors are detecting the jam which you can not see. 1. maybe there is a very tine piece of paper inside ...
Question about Office Equipment & Supplies
...ADF stopped working. It seems like page is not advancing into the machine. Is there a way I can make sure that it is activated through the maintenance menu? Thanks for any help. Are you sure there's ...
...no paper jam The machine gives a check document error, but there is no apparent paper jam in the ADF. Any ideas? It may be a bad hinge on the document feeder. I have seen several times where the ...
Question about Ricoh Office Equipment & Supplies
adf is not working So my first question is: Have you shut the machine down, unplugged it from the wall, waited 30 minutes then, plug the machine back in, turn it on and listen for the ADF solenoids to
...you copy or send. Lawrence problem could be with static discharging into CIS as paper runs through adf, was a common fault and there is a set of discharge brushes you can get to fix it or... unplug ...
Question about Canon Office Equipment & Supplies
...out help please thanks no error codes in display fuser rolling fine can see both trays toner full adf works took page in when copy but nothing came out any thoughts Call Canon support
Question about Brother Office Equipment & Supplies
...the scanner lamp. To test it, we started a copy and in the middle of its pulling a page through the ADF, we popped open the ADF a bit to see there was a section of the scanner lamp burned out when it ...
Question about Canon Office Equipment & Supplies
adf sporadically pulls fax/ copy through top If I'm sending more than a single page fax, I have to stand at the machine & make sure it goes through. Should I just replace the roller bar/ paper ...
Question about Brother Office Equipment & Supplies
...JULY 2006 Hello, I would first check to see if there is anything that is stuck in the top feeder (ADF) area. If that is all clear I would unplug the machine and leave off for about 10 minutes and ...
34 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions
