...fuser. Also remove print cartridge and look behind it, if this machine has duplex unit installed you will need to lift it off that first to axcess all areas. Check all doors are shut. pic of rear of ...
...CHECK REAR DOOR Media stopped in the paper path during power on or when the top door was closed. Action: 1. Open top cover and remove toner cartridge. Remove all media in the paper path, and then ...
...fuser unit installed. If the printer simply doesn't pickup the paper then remove the toner cartridge and using a soft cloth wipe clean the little gray rubber tyre that sits in the middle of the ...
Question about Canon Office Equipment & Supplies
...fuser the side that you see when it is installed There is a sensor finger in the center of the fuser rotate the black plastic piece to see it. Make sure you can lift the finger and it moves up and ...
Question about Canon Office Equipment & Supplies
...fuser is properly installed. 13.10 Paper Jam Check Duplexer Jam at duplexer. 1. Check the duplexer and the rear area of the printer for obstructions or damage. 2. Check the duplexer for proper ...
fuser is properly installed. On NX engines this is an input jam. 13.20 PAPER JAM CHECK REAR DOOR Media stopped in the paper path during power on or when the top door was closed. 1. Remove all media in
...installed a maintenance kit thinking there was a problem with one of the parts there, but the issue still happens. It happens shortly after the unit POSTs. Any ideas? I cleared that error on one by ...
Question about Canon Office Equipment & Supplies
fuser and check the gear inside the printer for broken teeth. Manually turn the gears on the fuser and check for smooth operation. Check the paper exit sensor arm for proper mounting and free movement
...check that it is the fuser is open the rear cover and remove the door. Once that is removed using the two blue tabs on the unit pinch then the unit will slide out look at the top brown roller and you ...
...the machine will work fantastic if there is a constant red light repeat above and check connections if still red light then the new fuser faulty and not heating up.Hope this helps all of you Thanks ...
51 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions