machine. SC441: Development motor lock. The development motor lock signal remains low for 2 seconds while the development motor is on. Too much load on the drive mechanism. Development motor defective
Question about Office Equipment & Supplies
...Development motor lock -Definition- [D] The development motor lock signal remains low for 2 seconds while the development motor is on. - Possible causes - • Too much load on the drive mechanism • ...
Question about Kyocera Office Equipment & Supplies
...lock (see page 1-2-15). 2. Check that the gears and spiral screw of the developer unit are not damaged. 3. Confirm that the developer roller can rotate. 4. If it won't rotate, replace the ...
...motor lock error. More than likely something is locked up, rather than a problem with the motoer itself. Make sure the drum and Developing unit are turning freely. The Fusing unit ...
Question about Canon Office Equipment & Supplies
motor. or problem due to cairtage leaver lock cairtages not engage properly i hv found max problem of this leaver it found damaged due to improper opening the doorpls follow above steps if problem not
...motor lock. this is normal for high copy volume printers. check the idler gear and developer gear of the pcu it is seldom the problem. here's the part no. B039 3062 Idler Gear - 16zB039 3060 ...
canon 1120 error: E021/0201 machine not getting ready I had a similar problem come up, and the best advice I can give is to reseat the various parts (drum and toners). Make sure the transfer drum is ...
...441 in cl3500dn printer SC 441 - development motor lock.Possible causes: too much load on the drive mechanism development motor defective poor drum motor connector connection interface board ...
Question about Canon Office Equipment & Supplies
the problem is about error 000002 0000 for my ir6000 General condition 1) Is the developing assembly locking plate mounted correctly? NO: Mount the plate correctly. General condition 2) Is the shutter
error code e000020 in ir6000 error code e000020-0000 in ir6000 E020 General condition 1) Is the developing assembly locking plate mounted correctly? NO: Mount the plate correctly. General condition 2)
118 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions
