...ink tanks are not installed in place" - pointing at magenta and yellow. When I open the cover black (full) shows a stable red light, cyan (empty) - a flashign red colour, magenta (empty) - no ...
Question about Canon Office Equipment & Supplies
...flashing. I dont think the ink is out and i did try taking them out following the instructions and put the same ones back in but it still won't print and the light is still flashing, will it flash if ...
Question about Canon Office Equipment & Supplies
...flashing, do printing, paper blank out : ink low message. Ink level low, near to ink out level. But it just program, may be ink tank is out actually (no ink at ink tank). Refiil ink tank or replace w ...
...ink tanks is not snapped in properly. The cartridge lamps on this model glow red when they are properly seated/installed. These little red lamps also flash codes: Slow flash (approx. 3 second ...
ink tanks properly following the procedure below. 1. Confirm that the printer is powered on and open the top cover. The print head moves to the replacement position. Note: When the top cover is opened
...ink tanks are installed properly and the ink tank lamps light red Note: Ink Tank Lamp You can check the status of each ink tank according to the way its lamp flashes. - On: The printer is ready to ...
...ink tanks should be installed. If the ink tank is not installed correctly, an error message will display. Confirm that the printer is powered on and press the Open button. (The paper output tray will ...
...ink tanks properly MP500 Ink Tank Seated Properly Refer to the following steps to verify the ink tanks are seated correctly: Confirm that the printer is powered on and press the Open button. (The ...
ink tanks in place properly? Have you tried this method to ensure they're properly seated? Is the printer on or off when you try to seat the tanks? Refer to the following steps to verify the ink tanks
ink tanks properly following the procedure If reseating or reinstalling to clear an error, the ink tanks and print head must first be removed.1. Confirm that the printer is powered on and open the top
214 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions
