Canon imageRUNNER 210S Copier "printers power surges" Questions

...surge and knocked out my printer. can the ac power adapter be replaced for this printer? Power surges on these can take out the main board (unnumbered), modem(3), and power supply(4), approx 150

I HAVE A BROTHER MFC7345N WHICH WAS PLUGGED IN WHEN A POWER SURGE OCCURED. NOW THE PRINTER WON'T TURN ON. youre printer mainboard just got fried. you are going to have to buy a new printer, unless the

cannot get power to our canon mp830 plugged into a surge protector and seemingly after a power blackout the printer will not turn on at all. plug in a light into surge protector and see if it works if

after power surge, canon I9900 printer will not turn on? after a power outage, we had a power surge.I9900 canon printer was off but was plugged into a socket with no surge protector. printer will not ...

...power surge most likely damaged your printer. Printers are a cheap item and getting it repaired would most likely not a cost effective solution. To prevent power surge problem you need to connect all ...

After power outage the printer won't power up. During a thunderstorm we lost power for a couple hours. The computer was off when this occurred. My dell PC (XP) works fine but the printer (922) won't ...

...power surges have blown although it is possible. First thing to check is that the power socket you use is ok. Try plugging another device into it like a lamp and see if that works. If it does then ...

we had a power outage, now pixma Mx410 won't come on, any ideas? Is pinter plugged into a power strip? Try plugging directly into wall. Make sure wall outlet is working correctly, try another item in ...

hp laserjet printer 2840 Rained heavy yesterday in my area and the power went out in my office for about 10seconds at most. Printer was pluged directly into the wall as directed by a hp tech because ...

Hi I have a Ricoh 1515MF and I recently had a power surge that fried my power strip, desktop and my Ricoh. The Ricoh will not turn on anymore. I have tried switching outlets, new power strips and ...