...If the error doesn't come back up swap the network cable, with a good one. 2.) Firmware upgrade 3.) Replace the system board Based on my experience it's either the network cable or the system
Question about Canon Office Equipment & Supplies
...Board Unplug network Cable or Parallel Cable from the printer and then turn it off and then on, if error goes away then it was a bad communication from the network or the computer This usually solves ...
Question about Canon Office Equipment & Supplies
...board ? Bad network cable ? Replace firmware DIMM ? Replace the jet direct card ? Replace formatter board ? Replace engine board 95% of the time it is a PDF that has a font that is not recognized by ...
...f-01 F10 00 Printer board problems 01 Printer board problems 02 Printer board problems 03 Network card error 04 Firmware error 05 Not enough memory 10 Printer board problems 90 Printer board ...
...bad formatter board (the network port is built in it). If the printer works just fine while unplugged from the network, start replacing the network cable, otherwise you need to look into your
...board (the network port is built in it). If the printer works just fine while unplugged from the network, start replacing the network cable, otherwise you need to look into your network (end quotes). ...
...to have taken the board out. The main board is speculation, but I think I am correct, sorry, Dave Your problem is the network card - take it out and the problem should go away.. Don Bristolprinters ...
...board. If you take the controller board out (it's the board that the usb/network cable plugs into). You find 2 banks. Ones for memory, the other bank is your prom board they refer to as a
Question about Sharp Office Equipment & Supplies
...code. F10 00 Printer board problems 01 Printer board problems 02 Printer board problems 03 Network card error 04 Firmware error 05 Not enough memory 10 Printer board problems 90 Printer board ...
Question about Canon Office Equipment & Supplies
...on the screen when I turn the printer on what does this mean and how do I fix the problem? [6500] An unidentified error or a network error occurred. (1) Part replacement: - Logic board - WLAN ...
199 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions
