Question about Canon Office Equipment & Supplies
replace the fusing sleeve. any one suggest the problem solving procedure. Reasons: 1. Teflon Sleeve, use better quality sleeve. 2. Apply good quality of Teflon grease.(Don't apply more or less) 3. Chk
replace fuser film sleeve on canon how to replace fuser film sleeve ? Hello , please refer to the website www.fsaokesi.com . There is the instruction for replacing the fuser film sleeve. Thanks! http:
Question about Canon Office Equipment & Supplies
...2 menu, scroll 2 device manager, scroll 2 system setup, scroll to print quality, scroll 2 fuser modes, scroll 2 fuser cleaning enter.. If U are not satisfied replace fuser assembly Or teflon
Question about Canon Office Equipment & Supplies
...replace the fuser sleeve only..and it cost not much.. you can always replace it by yourself if you are able to remove the fuser unit..other thing.when you switch on the printer, can you hear sound ...
...teflon sleeve if available if not replace fuser assm. In fuser modes we can increase/decrese the temparature of fuser. Note: only service engineer can replace the teflon sleeve.. user not ...
Question about Canon Office Equipment & Supplies
sleeve did you clean the heating element? if so did you also re apply new fuser lube? this Lube is not a normal lube.. its a lube that is specifically manufactured for fuser units and Teflon sleeves..
Question about Canon Office Equipment & Supplies
...go to a service centre they help you and replace it and install new one ,may be 20 dollar in cost this is quite easy to repair,either look on ebay for a sleeve,or contact hp with the fuser part ...
...it replace it if you can or replace entire fuser assembly. Replacing the fuser assembly is user friendly.How to remove fusser: browse this youtube video link: ...
...replace the fuser unit in the printer to correct this issue. The fusers are available from Amazon and other web sites and they are user installable. The part number is RG5-2657 or RG5-2661 either ...
...fuser to replace the fuser sleeve(roller) is something to be done by a qualified technician. for this size machine the job should take less than an hour with most of the time spent removing and ...
85 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions