Question about Canon Office Equipment & Supplies
...switch The scanner must be unlocked before turning the unit on. Turn off the power. Lift the document cover. The scanner lock switch is on the left hand side of the underside of the document cover. ...
...switch. Defective scanner motor. Replace the scanner motor. The mirror frame, exposure lamp, or scanner wire is defective. Check if the mirror flames and exposure lamp are on the rail. And check the ...
...switch .Defective scanner motor .Defective home position switch Also check the scanner rail some of the seals on the rail around were the motor sits turn to gunk and will stop the scanner assy from ...
Question about Canon Office Equipment & Supplies
...switch. The scanner lock switch is a switch that keeps the scanner assembly frozen in place so that when you move your scanner from room to room or apartment to house, the scanner wont freely move ...
...switch. Defective scanner motor. Replace the scanner motor. The mirror frame, exposure lamp, or scanner wire is defective. Check if the mirror flames and exposure lamp are on the rail. And check the ...
Question about Kyocera Office Equipment & Supplies
...switch. Defective scanner motor. Replace the scanner motor. The mirror frame, exposure lamp, or scanner wire is defective. Check if the mirror flames and exposure lamp are on the rail. And check the ...
Question about Canon Office Equipment & Supplies
...scanner lock/unlock switch for transporting but I would definately check for the switch either on the side of scanner or underneath the scanner and make sure it 's not in the locked position... Hope ...
...switch under the scanner, change position there's no switch in SCX 4521F Scanner.. i also had same problem... i solved it by opening the scanner lid, blow some air at the leftmost glass, clean it, ...
...Scanner. NOTE: The scan lock switch is located on the bottom of the Scanner Module. Make sure the scan lock is completely free. It sometimes hangs at the halfway point. Press the power switch to the ...
...Switch on the machine The machine will work properly. F14 Scanner unit FROM error Was the main PWA replaced? YES Download the scanner total count value into the main PWA in the setting mode (08-388). ...
115 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions
