Question about Canon Office Equipment & Supplies
...the mirror container. Lower the mirror container assembly. You can also clean the underside of the glass scanner bed at this time. Then, reassemble everything by doing everything above in
...the mirror container. Lower the mirror container assembly. You can also clean the underside of the glass scanner bed at this time. Then, reassemble everything by doing everything above in
...bed (the assembly that pulls out with a green handle been turned to the left). If it is after fusing then your fuser roller and/or cleaning web (roller) is worn and/or dirty. Some techs wind back the ...
bed scanners/all-in-one's have small holes in and around the tray that houses the scanner assembly. If you take canned air and use the long straw that comes with it, you can usually do a fairly decent
Question about Canon Office Equipment & Supplies
...bed. Open the front door then rack down the green handle and pull the unit towards you. If you look down and just right centre you will see a metalic unit running from the front to the back of the ...
...assembly has been blown out with air. What is different about the scanner function when using the ADF? The service manual is completely silent on this issue. Thanks Your scanner?s lock switch may be ...
...assembly will now "flop" freely, so steady it while removing the four screws on the underside. Note: The screw in the front is hidden under the piece that you grasp to gain cartridge access. Two ...
979 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions
