iLO 2600 Television "tv eeprom reset" Questions

...but tv side panel menu button working then how to reset EEprom to reset it. Hi Ahmed, Please try putting a fresh EPROM. It may work. I hope you have tried remote options in the service menu. Good ...

tv shuts down . Are you able to help ? thank you Kath This issue appears sometimes for having antenna power enabled. The solution is to reset the eeprom. Go to the service menu by pressing menu key on

...reset...a tech with the button combo can get you into the eeprom reset (the controller of video control) The button combo is usually something like: {HOLD POWER BUTTON} {HOLD INPUT 2 SEC} etc

...eeprom located on le40r74bdx I've changed the capacitors on my TV to try and solve "clicking" and "failing to power on", and I am having trouble figuring out which 8 pin ...

...TV does turn on now. The display is very distorted however. I have read that there may be a way to "reset" the EEPROM to cure this. Ideas anyone? The best and probably the only way since it's a Haier ...

...tv's with 7 blinks then 3 blinks. I replaced the power supply board and the tcon board. Narrowed down it's the main board (Green board with all the wires) Did some digging seems like there is an ...

tv no picture, but OSD/MENU works & when I change channels with cable box, the channel logos display momentarily. Backlights are on. Tried a factory rest. Tried service menu EEPROM reset. Model number

...tv will not turn on. Analyzing the circuit and testing the regulated voltages with an osciloscope i found oscillations on many regulated voltages on the video board, because of the bad quality of the ...

...to "Other Settings", then go to "EEPROM Init", then press enter, select YES and press enter. This will reset the TV to the factory defaults. If that does not work, send it back for repair. Good

EEPROM then use right arrow button on remote to select the appropriate procedure NB - on my set, selecting OFF the annoying melody that plays when the TV is turned ON/OFF diasbles Digital TV (Freeview