...head off my tripod. I've loosened the set screws at the base, but the head won't budge. You can try this: spray lubricant between ball head and base, wrap the ball head with a heavy rag( to help ...
...OF EFFORT TO SEPARTE THE HEAD FROM THE TRIPOD. MAKE SURE YOU REMOVE THE 3 LITTLE SCREWS FROM BELOW THE HEAD, AND MAKE SURE THE TRIPOD AND HEAD ARE NOT COLD. IF THEYA RE WARM THEY WILL SEPARATE
tripod=3/8 head = 1/4 need mounting plate 3/8 female to 1/4 male tripod = 1/4 head - 1/4 nothing tripod 3/8 head 3/8 nothing' tripod 1/4 head = 3/8 there is an adapter/reducer that screws into the 3/8
...tripod ball head How do I get the camera on and off the ball head. it looks like the plate would come off but I cant get it to come off. Is there a trick here is manfrotto's "How To" site, they have ...
I need to mount a ball head on it. What do I need? Here is a guide to tripods with ball heads CLICK HERE I hope this helps.... Good Luck!
A ball head for Quantaray Tripod model QSX 9002D? Found one through a friend. Thanks.
...head tripod due to how the tension works for the ball that it rests on. You can also order a new head from the same website. If you have any questions, shoot us an email at ...
...Assuming that all the knobs have been loosened it is likely that the head is dirty and there is some grit where the ball is. If it's not too bad some WD-40 should do the trick. Diane NYC Photo ...
head would fit my tripod Most tripods have a standard screw on top. This allows users to mix&match tripods and heads. Thus, just about any head should fit your tripod. If you're not sure, take
head to the tripod. Apparently there is a "leveler colum missing". Is this missing from the tripod box or the head box as I cannot get a satisfactory answer from the individual I purchased it from, or
6 questions posted
Usually answered in minutes!
2 Questions