JVC KD-SX980 CD Player "check wireing reset" Questions

locked its stuck on check wiring and reset unit but it wont reset, how do i reset the unit to make it work again? Remove speaker wires and try to reset. If it resets ck wires for a short.

...reset The check wiring message suggests a short probably in a speaker wire. Check that the terminal leads for the speakers are properly covered in insulating tape. Check the rest of your wiring, if ...

...check good try resetting the radio.  If there is a reset switch, it will probably be on the sub panel when you remove the face.  If there is no reset switch, you can reset it by ...

...wireing then internally. The fact that you did reset and it did it again only proves it. Sorry, this has happened to me before too. I have a kenwood kdc-mp635 and when i turn on my radio it reads ...

...reset button if it has one or remove all power to it) check the power to any amps you have hooked up and check for short circuited speaker wires (the - wire touching the + wire) all these things will ...

...check out fine try resetting the radio.  If there is a reset switch it will either be a small pencil tip sized depression on the face (it will not be marked)  or a small hole with a red ...

...check out fine, try resetting the radio. This can be done by pressing the reset switch, which is either an unmarked depression about the size of a pencil tip on either the face or the subpanel behind ...

...to default My Pioneer DEH-2100IB resets to default time and stations each time I start the car. check the yellow wire where it´s put because that wire needs to be connected to direct current ...

reset because i can hear it beep and the speakers buzzing I don't really think resetting the radio will help.  You may want to check all of your speakers and speaker wiring.  If you have

...check wireing /reset . i do so and it goes right back to check wireing again sometimes if the wires are to tightly together it can cause problems i have seen that happen before. You may just be ...