JVC PD-42V475 42 in. HD-Ready Plasma Television "turn split screen tv" Questions

Turn on and sync your other controllers if they haven't been connected before.Log in those controllers and press Resume Game. Your television screen should be split into two or four parts depending on

...powers up and has split screen one to left visible one to right looks like no channel menu comes up on left screen then tv shuts off and wont turn back on you are in pip split screen mode turn off ...

...turn the TV on the screen splits in two, When you turn the tv on the screen splits in two with the bottom showing black lines running horizontial then will disappear. It now has gone to the top part ...

...split screen and a large yellow message in the middle of the screen that has an exclamation point and the letters PSCAN. is this an issue that can be fixed with the tv remote or are one of the wires ...

...split" the screen into 2 smaller screens, otherwise it would be so outrageously expensive to have one big massive lcd controller. Your lcd controller is most likely a two-in-one card though, meaning ...

...a split second then goes back off. Power still appears to be on as Vizio logo on bottom of TV stays lit cleanning,,,,trun wire of screen split insider,,,,,,try the vizio,,,,wire look like the

turn on the screen would be split into 4 panes, after several more times of turning the main power switch off & on the screen would split into two panes & then finally just one screen. It took longer

...turn the tv on.. and it shows the products name for a split half a second flash on the screen then goes back off. try to reset it. If this works, u may have to re-rune all your channels How to Reset ...

TURN ON SCREEN WILL FLASH & RED LED GOES GREEN OR BLUE FOR A SPLIT SECOND AND AT THE SAME TIME THE SCREEN WILL FLASH AND THE LED GOES RED AGAIN. CAN'T GET TV TO TURN ON. Power supply board is dead

...turn on the TV it blinks "Please Wait" for a split second then nothing. I tried replacing the inverter board. Nothing changed. have you tried the screen control board on the back of the screen. were ...