JVC AV-48WP30 48" Rear Projection Television "position adjustment" Questions

...out the screen. I can get to the convergence grid, select to adjust red lines, and get the nine position grid but it will not allow the adjustments to any position. you need to replace the 2 ...

...adjusting. After powering on and waiting 5 min or so, I will adjust it the best that I can. All 9 positions can be adjusted, mostly. The Red gun in position 9 is a bit rotated clockwise so never ...

...lens array then you will have to adjust the lens position. for that, there should be adjustment screws located on the side and top of the lens, that way you can adjust both horizontal and

panasonic pt 53wx53g Is it possible to adjust the convergence without the remote for the TV? I was given the tv by a friend and it came with no remote. the picture is blurry and the color alignment is

adjusting the color convergence tv will not position when realigning in convergence. red and blue adjust toward green but green seems to be out of whack from position. took apart front of tv but don't

...position of a particular color. On each crt yoke there are some rings with adjustment tabs (usually 2 per tube) located right at the back of the yoke. When you rotate these while looking at a ...

...adjustment position on the grid. To move the cross-hairs to a different position, use the CH+/- buttons on the remote to move the cross-hair highlight up and down, and the VOL+/- buttons to move it ...

...adjustment command, if there is no way to adjust screen position , then it may be a faulty component inside the TV. Is the tv still under guaranty? also try re tuning the channel back into that ...

...position needs adjustment I changed out the color wheel on my HLP4663W and the quality of the picture is great. The problem is that the entire picture is about 1" below the screen, and I need to ...

...position on the convergence adjustment screen Dust will not be a issue with convergence. Not knowing brand and model and if adjustments were "saved" you could also have a problem in the convergence ...