are in the service mode, pressing the muting button saves the convergence values to memory. So are you not in the service menu when adjusting the convergence? more...
JVC AV-48WP30 48 in. Rear Projection... - Troubleshooting
Is this a convergence problem? I just got this TV from someone and they said the screen. When I go to the convergence adjustment in the menu, the crosses are all way off. It will not respond to more...
JVC AV-48WP30 48 in. Rear Projection... - Troubleshooting
JVC convergencehas to be adjusted everytime the TV is turned on I just to adjust it manually to get the best picture.I go to menu,Convergence there is Auto&Manual&Reset I pick manual make the changes and close more...
JVC AV-48WP30 48 in. Rear Projection... - Troubleshooting
said, if you merely accessed the front panel and changed the convergence amps, re-installed that board, and cannot seem to restore convergence - okay and you are able to align convergence in the customer menu then the only last step to storing the setup is to more...
JVC AV-48WP30 48 in. Rear Projection... - Troubleshooting
It looks like, to me, that you have to recalibrate the convergence ROM in your TV. I have a JVC 48WP34 and it shouldn't need to go to the standard convergence screen through the menu. You should be able to push that convergence button inside your more...
JVC AV-48WP30 48 in. Rear Projection... - Troubleshooting
clockwise Top Sides & Bottom I have tried to adjust the convergence But seems like the guns have been tilted counter clockwise a bit & when I try to use the code *Menu 9875 enter* the convergence does not comeup. However the other menumore...
JVC AV-48WP30 48 in. Rear Projection... - Troubleshooting
This is a convergence issue. Have you tried going thru the convergence touch-up thru the menu?. If you have and it does not cure your problem, the more...
JVC AV-48WP30 48 in. Rear Projection... - Troubleshooting