are in the service mode, pressing the muting button saves the
convergence values to memory. So are you not in the service
menu when adjusting the
convergence?
more...
them and add the heat sink compound NOW. If the
convergence IC's are bad then you will have access to the
convergence menu but the adjustments will have no effect. The fact that
more...
Convergence I'm unable to make any
convergence adjustments. I no longer have the technician, adjusted the
convergence using the +, on the
convergence menu. I was hoping to make similar adjustments without an expensive repair
more...
The yellow is being caused by misconvergence of the red and green beams. Go into the
menu and do a
convergence setup. Should be under video or
convergence more...
when viewing any video source but NONE inside of the video
MENU when I select that... I suppose it's something related to the
convergence board but want anyones experience/knowledge on this... Thanks, It's a projection
more...
ohm resistor was open, then you may have fried your new
convergence ic's. Sorry 2. bettween a 1.5 - 1.9 ohm resistor will button and press display on remote select
convergence from the new
menu and hit OK. Do fix the
convergence before you try to
more...
Do you have the proceedure to adjust the
convergence with the remote and the
convergence menu? that model usually blows the 1.5ohm 1 watt resistor. You can
more...
Sponsored Links