JVC AV-48WP30 48 in. Rear Projection Television convergence board

need to know the value resistor rz145 and rz144 on the convergence board for this model PCN5425RX/XAA more...

  JVC AV-48WP30 48 in. Rear Projection... - Troubleshooting

• Rate this result:
• = Poor
• = Average
• = Good
• = Excellent

Sounds like a convergence board problem. Cheapest fix is probably to replace the convergence board, more...

  JVC AV-48WP30 48 in. Rear Projection... - Troubleshooting

• Rate this result:
• = Poor
• = Average
• = Good
• = Excellent

man? No they are not. The Hitachi most likely has bad convergence IC's. You can disconnect the power wires on the convergence board and see if the set will start up. If it does more...

  JVC AV-48WP30 48 in. Rear Projection... - Troubleshooting

• Rate this result:
• = Poor
• = Average
• = Good
• = Excellent

The actual Convergence amp ICs not located on the convergence board are probaly what killed the origional convergence module, and likewise has more...

  JVC AV-48WP30 48 in. Rear Projection... - Troubleshooting

• Rate this result:
• = Poor
• = Average
• = Good
• = Excellent

there i have a rear view projection tv ave had the convergence board and ics repaired but the picture is bowed in the middle more...

  JVC AV-48WP30 48 in. Rear Projection... - Troubleshooting

• Rate this result:
• = Poor
• = Average
• = Good
• = Excellent

rear view projection tv is a 55pj6db ave just and the convergence board done but the picture is bowed in the middle pulling in more...

  JVC AV-48WP30 48 in. Rear Projection... - Troubleshooting

• Rate this result:
• = Poor
• = Average
• = Good
• = Excellent

has a green ghost. I read that it might be the Convergence Module Board. Any suggestions? more...

  JVC AV-48WP30 48 in. Rear Projection... - Troubleshooting

• Rate this result:
• = Poor
• = Average
• = Good
• = Excellent