JVC AV-48WP30 48" Rear Projection Television "150" Questions

i have a hitachi 51g500a convergence problem i have a 110 and a 150 what should i replace them with you can and should use two of the same; the 150 and 110 are identical except the 150 is a higher ...

can you use other than stk 392-150 like the 020s or the 110s? on sony kp53v80 You can use STK392-150 dont go any lower than the STK392-150 as they will burn out the 392-180 will work better

...guy I have surfed the web and found an array of info on replacing the stk392-110 chips with the 150/180 series. I have a JVC AV-48WP74 - existing chips are the 110 series. What is the best choice ...

stk392-110 chip is in my tv. can I use stk392-150 instead? The model number you indicated: WS-55809 does not use the STK-392-110--IT USES TWO STK-392-570 CHIPS. IF WHATEVER SET YOU HAVE USES A STK-392

board assembly or stk392-150 I have had the same problem occur today...red shadows and the red convergence will not move left or right to realign. I noticed your solution of replacing the convergence ...

...kit required to repair color alignment This is a model that uses either the STK-392-110 OR STK-392-150----BOTH are the same part but the 150 chip lasts longer. Most of the time the "kits" are a

...IC Bad I have an Sony KP53S76 Projection TV the Green convergence IC has gone bad. The IC is STK390-150 what is a Good replacement P/N? I have had trouble finding a direct replacement for this chip. ...

I was told to replace the ics with the STK 392 150 ics and not the specified STK 392 110 ics is this true and what is the reason for the number change The STK392-150 is a little beefier chip than the ...

...have fixed it also. CHECK THE FUSES IN THE MIDDLE CIRCUIT BOARD (there are 3 boards). (3) 4 amp 150 volt fuses (slow burn), and (2) 10 amp 250 volt fuses (ceramic), all replaced. $5.50 worth of ...

Tosiba TZ55V61 Convergence IC 150?s vs 110?s I am working on a friends set that needs the convergence IC?s replaced. I am wondering if it is advisable to use STK392-150?s instead of the factory STK392