JVC AV-56WP74 56" Rear Projection HDTV-Ready Television "know hd tv needs" Questions

...know that its hd signal. Your telly if it is hd compatible it will have this option in the menu acessed via the tv controll. You can only recieve hd quality if you have hd equipment or hd equipment ...

...HD TV and do not know much about it. All I know is that the picture is not as crisp and clear as it was in the store. Thanks The output from your sat reciver is not HD unless it says right on it that ...

...HD but do not know the process or the cost. Thanks for your Help!! Louis Kendall Check your manual, I have the same set and you need a WD 5000 HD upgrade panel, I believe. This TV is HD upgradeable, ...

...know if you have any other questions. Yes it is hd ready! if you have cable or sat you will need to connect to the blue/green/red conections on back of TV to get HD and if you are useing a antena you ...

...know if i will need a converter box for it. Thank you, William You will need a converter box for both TVs just to get the HD channels but you might not see the HD resolution on this TVs. Any TV that ...

know is Do I have to use a DTV CONVERTER BOX to get my TV to work after FEB 16th ANd how do I set it up ? NO!!!!!!! You are HD Ready if your TV is HD if not then you will need converter box to recieve

HD on my tv? I dont know how to switch the tv over to HD. It goes to video 1, to dvd, to tuner. My hd outputs are video 5 and 6. How do i switch it over? Press the TV/Video button on the remote. If it

...know how to connect the cables from my VCR & DVD to the LG HD Plasma TV. "No Signal" appears on the screen when I try. So, does it always say 'No Signal' or does it come up when you get ...

...know--I am here to help people. If this helped you, rate this solution as I do this here for free. SD TECH It a 1080i HD TV,all tv models 46 to 60 inches are HD 1080i.Recieve 480i 720i 1080i are auto ...

...know that i have mitsubishi hd-4001 controller input box and it don't give any display to the tv even if i can see the power led is on ...i know that the box is the problem coz put a pc input ...