Question about JVC Televison & Video
...end reusing original plug and harness (observe new bulb harness to keep wire locations correct) reassemble and install housing. Worked as soon as tv turned on. Watch out for non oem parts, they ...
...USE A VOLTMETER TO TEST FOR 5 VOLTS. IF YOU FIND IT IS IN FACT LOW YOU'LL NEED TO REPLACE THE 6 CAPACITORS THAT YOU WILL FIND HAVE AGED (THEY LOOK BUBBLED) THAT ARE ON THE POWER BD. GOOD LUCK. JOE ...
...plug back in again, the lamp light begins to flash without me powering on, then the picture returns, but still no sound. If I wait 24 hours the set seems to "reboot" properly and work normally for a ...
...Replace all blown or bulge or leaked capacitors with same value. That will fix your TV problem.The hardest part is to disassembling your TV cover, cause you will need to pry off the snap in lock at ...
Question about Sony Televison & Video
...end of its wroking life and tv needs lamp replacement. Please replace lamp in tv to get it back in business. Lamp replacement procedure would be written in user manual and its easy. Please buy Sony ...
...PLUG IT BACK IN AND THE TV AUTOMATICALLY COMES BACK ON...THAT WILL LAST FOR ABOUT 5-10 MINUTES AND IT SHUTS OFF AGAIN Having in mind that a generic lamp will give you 4500 to 6500 lamp hours and the ...
...need to check the status of the lamp and also the lamp connectors, the supply from the power. Check to see if the cooling fan is clogged and so has reset the processor with a error. If so clean the ...
...need to reset lamp timer dont have the book and i cant reset it it keeps turning off on me Here is the procedure for reseting the lamp. It can be found at: ...
...Replace the lamp. The TV will not operate when the lamp no longer illuminates. or you made need service for the tv.. Some projection TV have a high temperature switch that opens if the lamp enclosure ...
168 questions posted
Usually answered in minutes!
443 Questions
354 Questions
208 Questions
175 Questions
149 Questions
