JVC AV-32920 32" TV "turns hit volume" Questions

...hit the volume control, the 'tv' button flashes, and it will raise and lower the volume. help! [email protected] It sounds as if you have inadvertently selected the 'Aux' function. Pressing the 'TV' ...

...volume but i can still bring up guide and change channels i was wondering if there is a way to fix that (forgot to say i can't even turn the tv on other then climbing up the wall like spider man and ...

...Hit the volume and it does come on till the it is turned up half way. So half way you can barely hear and then when we turn up sound full blast we can just hear it . I have check the audio but not ...

o he screen. when you hit volume the black goes away until the volume icon goes off Go to ur tv menu.Go in captioning turn off all 1,2,3 and all txt will stop the black box in the middle of the screen

...level went to maximum, and would not turn off. The volume control would lower the volume, but it returns immediately back up to maximum on its own. I can now turn off the TV (new symptom), but most ...

turns on but there is no sound and no picture...Can't be that bad right? Please help!! Try (with your remote) hit Display + Channel 5 + Volume - + Power hit each key within 1 sec of each other and the

...hit display,5,volume down,power the unit will fire up and function. Can change channels, volume, set-up, etc., on screen display of self diagnostic shows the following; 2: +B OCP 0 3: +B OVP N/A 4: V ...

Tv will not turn off with remote or button on tv itself. Remote will change channels and volume but will not shut it off. With remote hitting off button kills sound but picture stays on My sharp does ...

...turns the TV off, but it cannot turn the TV back on unless that wire is connected again... arghhh Does anyone know wiring enough to give me advice on how to connect this wire so that it will bypass ...

...Could this be the problem? Thanks for the help. -Caleb just resoldering at volume board , try to just hit the tv at aside if the sound alters then re solder regards please don't forget to rate ...