JVC AV-27720 27" TV "fuse blows power" Questions

...Blows internal fuse We had a power surge, the TV went off. I removed the rear cover and found the fuse blown. I replaced the fuse with a 5 amp one and it blow it straight away. Was the fuse wrong or ...

...blows because the degaussing circuit works too slow, the original fuse is an 6.3 amp fuse, you need to replace it with a 6.3 amp slow blow or a 7 or 8 amp fuse to keep it from blowing, if you put an ...

...repeatedly then there must be a short circuit in the power supply, Check the PTC it must be short and blowing fuse due to it.      Hope this will fix your problem.    

blows fuse when turned on sansui 3200 keeps blowing fuses when you turn it on it blows fuse this is a normal behavior if one of the power supply transistors have blown. take the unit to an ...

...Power on 32" Panasonic Followed your response recommendations. New 6.3 amp slow blow installed. Works great. Tried the 5 amp fast blow first. This did not work. I hope the slow blow doesn't hurt ...

...start with a 1.0A fuse. If that immediately blows, then increase to a 1.5A fuse. Repeat until 2 A fuse is reached. If still blowing, then there is a problem with the set, either power supply or

fuse blows as soon as I apply power... The 3.15A fuse on the actual power connection board is fine. do not attempt to repair by putting back fuse there is possibly short circuit in power boared get it

...power. is there a fuse? All telivisions has fuses inside. Some of them has one, and some has two. If your tv doesn't power on, and power chord and outlet is ok, surely the fuse inside may blown out. ...

...has a little panel around the power cord with a single screw; the real trick is fitting my hand in there to change the fuse. I guess they make the opening for monkeys or small children or

...power up, but the fuse does not blow again. I do not have the service manual, any ideas what else may be in line with that fuse that could have blown. The main fuse should be a 4 amp fuse not a 1.25 ...