...the powersupply and this fault also damages main pcb, both power pcb and main pcb needs rebuilt and Eeprom data reset on main pcb after rebuilding power pcb, you can also fix the power pcb yourself ...
my hisense tv is saying eeprom error 54cm coulor tv Main system control memory IC [EEPROM] fault. Contact any service technician. Electro help
my tv wont come it on standby red light A fault at the EEPROM noticed possible component failure and has stopped all executions of commands. You need a Service Tech to service your TV to remove the ...
Panasonic TX 28D euro4 chasic have stand by led diode but can't started with remote or manual. A common fault is the eeprom. It needs resoldering or replacing.
...then ring JVC and ask one of their technicians. In the field of troubleshooting it would in eeprom trouble., replace the EEPROM/Memory to restore in factory mode.. otherwise pogram the EEPROM ...
...time may not do the trick. If the hard reset does not fix the problem it probably has a defective eeprom or a bad voltage regulator that feeds the controller IC-EEPROM IC's. In which case you will ...
...of time may not do the trick. If the hard reset does not solve the problem it has a defective eeprom OR a bad voltage regulator that feeds the controller IC/eeprom set. In which case you will ...
THE GREEN POWER LIGTH DONOT STOP TAKE OFF THE EEPROM CHIP AND LIVING MORE AT 10MIN.AND NEVER STOP THE BLINKIG The amin board is faulty. Contact any service technician. These blinks [flashes] are fault
...go away. It will come back, it's a common fault for this set and theres a mod to be done to the
I replaced the fuse on my Hisense TC2108D TV, but now its show EEPROM ERROR PLEASE CHECK it due to EEPROM IC fault the iC is 8 pin and mark as 24CXX here XX -is 02 ,08 or 16 like that just replace new
35 questions posted
Usually answered in minutes!
443 Questions
354 Questions
208 Questions
175 Questions
149 Questions