JVC BR-DV3000U DV/Mini DV VCR "standby light" Questions

...standby light is solid red. The three lights are flashing - tape in, timer, rec. There is absolute no reaction by pressing the buttons on the recorder front panel nor on the remote control. Only one ...

standby light if not then it is going to be the internal fuse needs replacing these are cheap to buy it is located where the powe lead goes into the unit and it is a glass fuse take it to shop to make

standby" to "on". Unplugged unit, replugged, no response= obvious now that left tape was not cycling due to roller missing...). Next step? Can I reset unit to light up / load tapes? No. Sound like the

vcr not working Hello, I have a Sharp vcr and the -/+ buttons all of a sudden don't work either on the vcr itself of the remote my sharp vcr VC-H91cannot be switch on. only the standby light is on

It intermittently shuts down when it is playing or rewinding/fastforwarding, the machine goes into standby mode. On turning it on, the tape can be heard moving forward or backwards not sure which, it

...standby light, nothing. Any ideas? Thanks, CVS One or more sections of the power supply are not coming on. This unit has both fuses and ICP's (integrated circuit protectors) in the power supply that ...

...Lights but No Clicking, Picture or Sound when I Plug it In. If the front led is lit, the TV is on standby. Did you place the batteries in the remote correctly? There might only be one button that ...

...light bling six times,what is the problem with it . These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the ...

...tv goes off and all the lights for the dvd,vcr and hdd flash repeatedly until the machine goes to standby. could be a humidity or moisture ...

standby light remains lit, solid. Look for blown capacitors on the power supply board. They will have domed tops instead of flat tops Some will look puffy too. You can get a repair kit if you're handy