My vcr does not play the tape My vcr does not take the tape. i put it in and it does not fully go in. Then when i press play it says there is no cassette.What should i do? Take the cover off & ...
F08 Error message, keeps shutting down Hi, I have inserted a tape into Panasonic AG-DV2700 Mini DV Player/Recorder. It closes normally then it shuts down and show a F08 error message on the display. ...
Question about Samsung Televison & Video
tapes? If so then the micro switch could be stuck in the open position, try to give it a clean with a blast of air duster first then check the contacts on the switch. If it is happening with just this
Question about Panasonic Televison & Video
VHS tape is running at high speed when insert it to VCR. no playback..buttons doesnot work. when i insert the tape into VCR *the tape start to run at high speed. *the buttons does not work .(ff , play
Question about Emerson Televison & Video
Tape In light flashes every ~0.8 seconds even though no tape in there. Tape got stuck on way in, removed cover and manually extracted it by pulling on large belt but now control wheel seems confused ...
rewinds to begining of tape automatically even though their are recorded segments on the tape don't know correct term but could it be the tape sensor switch? Is this an easy repair? I believe so, but ...
Flashing "2" on VCR front panel. I recently had a tape get stuck. Took off the top and got the tape out, now I have a flashing [ 2 ] on the front panel. The tray seems to be stuck. Anything I can do? ...
Question about RCA Televison & Video
Why does my RCA VR667 not accept a tape and returns a eject or stop message? A couple of reasons. First the carriage the tape sits in is damaged. Next the mechanism that moves the tape is damaged and ...
...brand tapes. Unplugging for days does not help. Two things. First there is some damage to the tape transport mechanism. Only a good look around will confirm this. Secondly a faulty mode
Question about Televison & Video
I have a Sharpe DV-RW360 and when I tape anything the vcr comes out when it has finished tapeing why as it still has more to tape This might be a mode switch problem. The mode switch tells the ...
16 questions posted
Usually answered in minutes!
443 Questions
354 Questions
208 Questions
175 Questions
149 Questions