JVC THS55 System "pin connector" Questions

...pin' connector is actually a 9-wire connector. Along with the above pinout, you will need to add Case Ground, which is the metal circle that surrounds the pins. To make the speakers turn on, you will ...

pin on the left speaker connector inside your unit or a damaged connector - a fault or a desoldered contact on one or more components in the left channel's preamp or final amp section, or at the power

pin d-type female connector. Just solder speaker cables to the connector. no, no and no. special cables, not compatable with anything else. The crossover is in the base, not the speaker boxes. They do

...pin mini DIN connector for the zone you're using. Using the pinouts from step one for the cable connector will create a mirror at the Bose jack as follows, left to right, top to bottom 3, 2, 1 - 6, ...

...connector I am trying to find a longer "system cable" for my unit.Is it simply a 8 pin mini din serial cable similar to that used on an apple mac?   I require approx. 6m. u can get one from ...

with a different make of flash drve. Yours may be drawing too much current. deanno & Guest Check that none of the four connector pins in the USB socket are bent or touching another pin or the surround

...pin connector and the 20 pin connector (some times a 16 pin) on the pc power supply and i cut the wires so that there was about 10" to 12" of wire hanging from each connector. These are the 2 ...

...pin connector and is a 50mmx50mmx15mm. I was unable to find you a 2-pin fan but I did find a 3-pin to 2-pin adapter here ...

...pin or connector. here are some pix of what im working with please color code wha003 for me at the solder points thank you. http://i173.photobucket.com/albums/w46/xkjnboix/wha001.jpg ...

to call Bose to see where I can get one. Does anyone know? Help! You can make one, just need a female 15-pin d-type connector and a lot of speaker wire. Solder the wire to the connector as shown below