LG 42PX5D 42 in. Plasma HDTV "protect mode" Questions

...protect mode, because a fault had been detected. If the TV went in standby and does not wake up, then the TV is in protect mode. In protect mode higher voltages from PSU gets shut down and TV remains ...

...mode to protect you from fire. If you'd like the TV repaired, you should contact a local TV repair shop and obtain an estimate. I don't recommend opening the TV up by yourself to correct the

lg tv using tda12135 ps /n3/3/ag1 set is on and goes to protection mode inicialy heater volts come filament glowing than goes to protection mode runing standby problem in TDA12135PS/N3/3/AG1

...you can tell this is you do see the video information on the screen before the unit goes into the protection mode.The protection mode protects the circuits from doing more damage to ...

...tv switches of after 6 secs how can i overcome this problem Hi Bhulla Singh Ji, Your TV is going in protection mode. Protection mode is for switching off the TV automatically to prevent any further ...

How can I get Dynex TV out of "protection mode"? Tv went out during storm. (Surge possibly from cable box; did it another tv after the first one). Friend look at it. Nothing fried. He's been told ...

...the television switches off into idle mode Older Tv's burn parts first before fuses breaks for protections.But most of today's new TV's has builts -in protection mode in case any ...

...protect mode How to get Samsung HT2310 out of protect mode If the set go under protect mode, there should be some short circuit inside the circuit boards, of any improper user setting might have ...

...protect mode my philips plasma model number 42pf5321d/37 is finally not turning on. led turns green and then it flashes red.What are the most common components causing this? Hi, One of the PCB's ...

...protect mode because a internal fault is detected. Protect mode is a forced standby mode that starts when an internal fault is detected. The TV power board supplies power in different voltages. When ...