Question about Mitsubishi Televison & Video
...TV and to 1/4 displays perfecty fine. Image - sound etc Bottom 3/4 is blank. I haven't been able to do much in terms of troubleshooting, but figured I'd post Check the vertcle yoke pins for solder ...
...3. Press the button labeled MENU. The screen will show the main TV menu. 4. Press the #5 button (channel lock option). The screen will change to show the channel lock System Menu. This screen will ...
Question about Mitsubishi Televison & Video
...tv started to act like the vertical hold was going, however in the beginning it would stop after it had warmed up. after a while it would not stop scrolling up and eventualy it would not display any ...
...displays "BYE" and then flashes "12:00 A" (5) Release the up and down channel buttons (6) This will clear the unit and you will be prompted to reset the TV Guide Settings (7) Setup your TV Guide ...
...3. Press the button labeled MENU. The screen will show the main TV menu. 4. Press the #5 button (channel lock option). The screen will change to show the channel lock System Menu. This screen will ...
...3. Press the button labeled MENU. The screen will show the main TV menu. 4. Press the #5 button (channel lock option). The screen will change to show the channel lock System Menu. This screen will ...
...TV since 2003 and have had 2 new blocks put in under my 3 year warranty, and they also quit after a while and have the same convergence problems. They finally gave me a check for a new TV as it was ...
...3) TV RESET. If all else fails for soft error. Your manual describes this last resort for soft type error. It could be hardware problem needing more expertise. Manual can be viewed on a computer ...
TV Step 2: Hold the ON/OFF Button for 10 to 20 Secs Step 3:Without taking the hand from the ON/OFF button unplug the power cable connected to the wall outlet from the TV Step 4:Without taking the hand
183 questions posted
Usually answered in minutes!
2,254 Questions
610 Questions
478 Questions
339 Questions
330 Questions