Question about Krell Audio Players & Recorders
...Output to speakers is weak on left channel. Switched output cables and now right channel is weak. Any ideas? switch input cables and try this will confirm if the amp has a problem or the input ...
Question about Marantz Audio Players & Recorders
...left channel weak compared to the right Hi, I got a Marantz pm-7200 amplifier the problem with this amp is that the left channel sounds weaker than the right. I used different sources Cd players and ...
left channel .b) say if the same channel produce weak audio, then the problem is on the SU v8 amp.c) inside the amp, there are main amp and preamp with selectorswitches.d) try to test , if all inputs
Question about Technics Audio Players & Recorders
...left channel and you hear a weak signal then the pre-amp will be OK. If not then start with that section. Remember the right channel will be the same as the left so compare the parts. If it looks odd ...
...left (very weak), then the pre-amp is working and it's the power amp that's gone. Vice-versa if you can't anything, but say hum. If it is the power amp check out the devices on the heat sink. Check ...
...the left speaker is noisy and nearly mute after playing appx. an hour. In the meantime, I restart the amp. and it is OK again. Sounds like your left channel output transistors are getting
...weak signal from the left speaker. When I turn on the volume, it remain the same. It's the ribbon cable that is likely at fault. There are actually three computer type ribbon cables in the amp. I ...
...weak or inaudible. I would like to keep the unit if repairs are reasonable. I have replaced patch cables and speakers (left & right) The problem is internal to the receiver and could be as simple ...
...weak output on the left channel. 3) Check and balance settings. 4) Check the speaker phasing. 5) Check all the interconnections, plugs and sockets. You could squirt some switch cleaner on a rag then ...
left one in both speaker A and speakers B please tell me what to do i tried to change cables but no effect then finally i knew that there is a problem with the amp itself If you understand electronics
21 questions posted
Usually answered in minutes!
59 Questions
46 Questions
28 Questions
36 Questions
35 Questions
