LCD projector no signal message When I connect to a projector, I get a no signal message. The Windows
startup screen is visable but disappears and the "no signal" message appears.
the remote can only turn acer PD726W projector on and off. Message says no
more...
Hi there If the temp light is showing from
startup and doesn't fire up at all - you might be facing a Mainboard fault. This will need either repair or replacement. Must warn you
more...
the problem stil occurs this might be a faulty Mainboard - which would need either repair or replacement. Does the discolouration show in the
startup screen as well ?
more...
2 on the back of the projector and allow the projector to warm up for 1-2 minutes...When the projector has warmed up, the Compaq
startup screen will display and the LED on the Standby button 3 will turn green. When the
startup screen disappears, the video from the attached
more...
projection screen. If applicable, press the Function key on the computer designated for external display...If there is a long delay between the time the
startup screen displays and the time the presentation software is launched, the lamp may shut off and the projector will automatically go into standby mode.
more...
Disable all other networking activities on the Dell. This may include auto updates, security/antivirus checks, etc. while running the DVD; 1.4 Slim down Dell's
startup programs to bare minimum; 1.5 Increase your OS' swap file to roughly double your onboard memory 2. Try running a hub midway between the
more...
is part of the total projected image; however, it is an inactive area and cannot display any part of the image. Only the Compaq
startup screen displays 1. Check that the cables are connected securely. 2. Verify that the proper input source is connected. 3. Make sure your portable
more...
Sponsored Links