Proscan PS61670 61" Rear Projection Television "anodes tv high" Questions

...wire but not what it looked like or where it was help much appreciated. the anode wire is a heavy red wire in a projection tv there will be three be careful the anode wire carries the high

...TV technician take care of this problem. As a suggestion have him check the HV on the CRT anodes and the voltage doubler which the IHVT goes into. In any event get the set checked and repaired by a ...

...tv set came in with usual high voltage snapping at anode replaced anode cap and wire and silicone set then fired up ok but with poor luminance , looks like problem where raster is similar to turning ...

...tv it makes a pop noise goes blank and then comes right back on but we turn it off right away because we are afraid it will stay off like it did last time it had to be serviced! The people who fixed ...

...High Voltage Transformer) being bad is very slim. By now you are wondering if I intend for you to try to do this yourself? The answer is : No I do not. What I would suggest is that you take the TV to ...

...on the TV it made loud crackling, poping noises and the power red light was just flashing. The sound is fine just no picture. sounds like high voltage arcing,/flyback,focus block,h.v. anode lead

...TV used to generate high voltage supplied to anode of cathode ray tube to attract electrons emission and produce light on front phosphorus coating. More details are available on Wikipedia Fly-back ...

...tv and when i turn it on, one of the anodes or something in the back is fried and sending charges which are sparking out of this piece on the motherboard. Didn;t know if I could cut of that circuit ...

...check to see where the burning smell is comming from. could be anode, hv wire, splitter, surge caps in h-circuit, but it sounds like a high voltage transformer. what is your model number of your

...TV Sound Works But No Picture And There Is A Snapping Sound And Light Or Ark Flashing Happening Inside May be the high voltage lead(s) have popped off of one of the pix tubes...the flyback(HV) ...