Epson EMP S1 Multimedia Projector "new lamp working" Questions

...new lamp soon I think. But I want to ensure it is not a projector issue. Thanks in advance, Kevin since it has worked 1200 hours or even more since u have been resetting the counter! just change the ...

...new lamp have had projector serviced, sometimes works sometimes does'nt. Please help this is the second new lamp both have worked for 2/3 films then lamp/cover problem. Go into the menu and reset the ...

...projector detected that a new lamp is intalled, it should work fine now. but if its still not working, you might want to try and replace the new lamp again. sometimes this happens. hope this

new lamp projector lamp shuts off after 20 minuts. where as on my old lamp it works properly. I checked new lamp in other same model projector & there it works properly. All the projector settings are

...new lamp -- it did not work; the new lamp never lit up? Then I replaced the lamp with the working lamp from the second LP 350 projector that works. Since the projector turns off the lamp after 2050 ...

...new lamp but Replace the Lamp prompt still displays. Installed new lamp. "Replace the Lamp" prompt still showing YOU CAN TRY TAKING THE LAMP OUT AND REINSTALLING IT IF THAT DOES NOT WORK WILL PROBALY ...

...new lamp driver. New lamp cost me $350, lamp driver cost me $120. Then I read on a page to try and flip it right side up, because I had it ceiling mounted upside down. I flipped it right side up and ...

...new lamp is working fine but. I changed the lamp in my sp7210 the new one is working fine...I reset the lamp timer...but it keeps telling me I need to change the lamp??? I reset the timer again..it ...

...new new lamp will not light at all. I read that it may be a lamp timer, so I reset that also and that did not work. Any hep would be wonderful. Thank you the connection that the lamp plugs into backs ...

...lamp, new lamp stopped working in about 5 hours, got another new lamp and it does not light at all. Still blinking 3 red blinks(saying the bulb is bad) make sure the colorwheel is spinning. if it is ...