Epson EMP S1 Multimedia Projector "change new bulb" Questions

CHANGE DE BULB'S PROJECTOR, HOW I DO IT? I DON'T HAVE THE USER GUIDE. On the side you plug everything to.... has 2 screws.remove them ..after completly removing screws..remove cover plate remove the 2

...What can i do ? Thank you! Try removing the new bulb and reinsert it and make sure it make a good connection. Be sure to follow your projector's instruction manual on how to change your bulb

change a lamp on an NEC projector MT 1075? There is a small cover plate, about 3"X6", that 'just' snaps off. You might have to use a small screw driver to pry it open. The bulb can then be pulled out.

New bulb will not power up This projector had the bulb changed 1 month ago, it blew and now it will not power up the new bulb. Has it blown the board? I pressed the Help button on the remote for 10 ...

sure that you installed the new bulb correctly , then I recommend that you reset your projector . Some projectors don't realize that you changed the bulb physically until you reset them . please rate

...change in operation of the projector. I have contacted several service providers in the area but they are unsure of the problem. (no toshiba service centers near my residence). Does anyone have a ...

...twice and the last design change worked very wheel. The new sensor assembly comes with new temperature sensor cable, focusing spacer. I am factory trained and I can repair the projector for

Changed the bulb, however, we still get a red scre... Changed the bulb however we still get a red screen. check your connection with a brand new cable

...new bulb, and reset timer. Still starts to flicker then the light goes out and the fan kicks on. Same thing it did before I changed the bulb except it doesn't tell you that the bulb is expired ...

new bulb but after changing it it now says the bulb is at 0 % and no longer works. Is there a reset button we may have missed when changing the bulb? to reset the lamp hours, simultaneously press down